backup

Script to backup Cisco switches via telnet / tftp

Published October 21, 2009 |

A couple of days ago, I have released a small perl script to back up Cisco IOS based switches via telnet. I know there are a couple of similar scripts available on the internet, but most of them either use the “expect” functionality (which does not work all the time), or use SendKeys (which only […]

Posted in Cisco, My Free Tools, Networking, Scripts | Tagged backup, Cisco, cisco-script-backup, cisco-switch-telnet-linux-script, cisco-telnet-script, configuration, expect, free tool, ios, linux-script-backup-cisco, perl, sauvegarde-config-switch-cisco-en-perl, schedule, script, sendkeys, telnet, tftp, tftp server, vlan, vlan configuration

Juniper ScreenOS : Active/Passive clustering

Published July 5, 2009 |

By Peter Van Eeckhoutte (corelanc0d3r)

Introduction In this blog post, I’ll show the easy steps to set up a screenOS based active/passive cluster. I’m not going to discuss the configuration of active/active clusters because, in my opinion, this configuration is only needed in rare circumstances and may introduce some weird behaviour issues. Furthermore, active/passive clusters have been working quite well […]

Posted in 001_Security, Juniper, Networking | Tagged arp, backup, backup device, cluster, configuration, device, devices, eBB, failover, iBB, interface, Juniper, master, master device, mycluster, node, nsrp, OB, preempt, redundancy, rto, screenos, set, set nsrp, sync, vsd, vsi

Free Tool – Cisco Ironport C350 Safelist / Blocklist merge utility

Published July 27, 2008 |

By Peter Van Eeckhoutte (corelanc0d3r)

If you have multiple Cisco Ironport C350 devices, you may have noticed that safelist / blocklist entries are bound to an individual device. So if your Ironport devices are both installed to handle incoming mails, end users need to manage safelists/blocklists on both devices in order to be sure that both devices operate in the […]

Posted in 001_Security, Cisco, My Free Tools, Networking | Tagged add-user-to-ironport-c350, backing-up-ironport-configuration, backup, backup-ironport-config, blocklist, c350, Cisco, free tool, iron-port-serial-number-with-cli, ironport, ironport-blacklist-entries, ironport-c350, ironport-c350-manual, ironport-c350-serial-manual, ironport-config-file-tool, merge, not-able-view-safelist, safelist, step-by-step-configuration-of-ironport-c350, sync

Windows 2008 PKI / Certificate Authority (AD CS) basics

Published July 14, 2008 |

By Peter Van Eeckhoutte (corelanc0d3r)

Keywords : Windows 2008 PKI Certificate Authority certutil certreq template root CA Enterprise CA convert pfx to pem generate custom certificate request subject alternate name san attribute Today’s blog post targets the deployment of a Windows 2008 server based Certificate Authority (AD CS) and will discuss some common scenario’s where certificates are used / required. […]

Posted in 001_Security, Active Directory, Certificates, MS Exchange, Windows Server | Tagged 2008, aia, backup, ca, capolicy.inf, certificate authority, certreq, certutil, common name, convert to pem, cp, crl, csp, custom request, distribution point, import-exchangecertificate, issuing, key recovation, keytool, lifetime, new-exchangecertificate, ocsp, root, san, software key storage provider, standalone, subject alternate name, validity, x.509

System/Disk Backup in Vista using command line script

Published April 13, 2008 |

By Peter Van Eeckhoutte (corelanc0d3r)

Microsoft has implemented a really neat feature in Vista Business, Enterprise and Ultimate, allowing you to perform a full disk or even system backup, while the system is running. This new backup tool used Block Level backup and uses Volume Shadow Copy to backup open files (however, it is advised to close your applications while […]

Posted in Windows Client OS | Tagged backup, backup-vista-command-line, command-prompt-backup-vista-how, command-prompt-vista-take-back-up, complete-backup-vista-from-the-command-line, diskpart, enable-backup-in-command-line-in-vista, how-to-back-up-windows-files-using-cmd-prompt, how-to-creat-system-bakcup-in-vistas-using-ccmd, run-vista-backup-from-command-line, script, vaio-eisa-partition-copy-gparted, vista, vista-full-system-backup, vista-home-basic-backup-command-line, volume shadow copy, wbadmin, wbadmin-removable-drive-support-backup-storage-location-error, wbadmin-syntax-backup-vhd-name, windows-script-to-do-backup-files-to-a-cd

How to backup VMWare ESX virtual machines

Published September 23, 2007 |

By Peter Van Eeckhoutte (corelanc0d3r)

Today, I will try to explain 2 techniques that will allow you to backup your vmdk files (virtual machines) on a VMWare ESX 3.0.x server. My lab runs on 3.0.2, but this will work on 3.0.1 (and maybe earlier versions) as well. Before continuing, let’s make a couple of assumptions : I will explain how […]

Posted in Scripts, Virtualization | Tagged backup, backup-esx-virtual-machine, backup-esx-virtual-machines, backup-vmware-virtual-machine, cli, copy-esx-vm, copy-esx-vm-to-same-machine, esx, esx-tar-vmfs-backup, esx-vmbk-pl, how-to-backup-virtual-machines-in-esx, how-to-backup-vmware-virtual-machines, how-to-copy-vmware-machines, schedule, schedule-shut-down-and-start-virtual-machine-on-esxi, script, virtual machine, vmware, vmware cmd, vmware-esxi-backup-active-virtual-machine

Corelan Cybersecurity Research

:: Knowledge is not an object, it's a flow ::

Script to backup Cisco switches via telnet / tftp

Juniper ScreenOS : Active/Passive clustering

Free Tool – Cisco Ironport C350 Safelist / Blocklist merge utility

Windows 2008 PKI / Certificate Authority (AD CS) basics

System/Disk Backup in Vista using command line script

How to backup VMWare ESX virtual machines

Corelan Training

Donate

Corelan Team Merchandise

Corelan on Slack

Actions

Categories

Hi there!

We have good news for you!